English
Why choose us?
1. Short optical storage time.
Short light storage time and long light-emitting time> the time required is about 5-20 minutes,Once fully storage, it will last lunimescence more than 10 hours in the dark.
2. High hardness and good abrasion resistance.
The product has high mechanical strength, high surface hardness and good wear resistance.
3. No corrosion and never age.
High and low temperature, strong weather resistance, non-corrosive and never aging. It can be used indoors or outdoors, making up for the shortcomings of traditional resin light-storing self-luminous materials which are easy to age and have short service life.
Inorganic light storage self-luminous material is made of academician expert team hired by Globright Co.,LTD. They studied the situation in which the luminous self-luminous material was changed from the synthetic resin of the luminous material before. Let it become the luminous body which include many multi-mineral materials such as rare earth, strontium aluminate, silicate, and inorganic crystal.
♦ Safety guidelines for caverns, civil air defense works, tunnels, underground garages, basements
♦ Fire protection signs and safety guidelines
♦ Safety signs and decorations for trails, corridors, park roads, courtyards
♦ Safety guidelines for river banks and reservoir embankments
♦ Safety signs and decorations in the fields of stairs, skirtings, etc.
♦ Safety identification of electricity and communication facilities
♦ Decoration of the exterior of the house
No electricity required-no longer dark at night!
The product meets the requirements of GB / T4100-2015 "Ceramic Tiles" Appendix G: Dry pressed ceramic tiles E≤0.5% B l a and GB 6566-2010 "Limits of Radionuclides for Building Materials". Surface density of luminescent layer：≥2.2 Surface hardness of luminescent layer：Mohs 5 Low temperature resistance：≤-40℃ High temperature resistance：≥180℃ Failure strength：≥5000N Impact resistance：≥0.84 Abrasion resistance：≥Level 3/1500 rpm Pollution resistance：≥level 5 Frost resistance：No cracks and peeling Thermal shock resistance：No cracks and peeling Wet swelling：≤0.02mm/m Coefficient of linear thermal expansion：≤6.2×10-6 ℃-1 Modulus of rupture：Average and maximum value≥43MPa Chemical resistance：Reach GA level Radioactivity：Meets Class A requirements Self-luminous brightness：Product excitation stopped for 10 hours, afterglow intensity ≥16mcd / m2
 |  |
 |  |
 |  |
Why choose us?
1. Short optical storage time.
Short light storage time and long light-emitting time> the time required is about 5-20 minutes,Once fully storage, it will last lunimescence more than 10 hours in the dark.
2. High hardness and good abrasion resistance.
The product has high mechanical strength, high surface hardness and good wear resistance.
3. No corrosion and never age.
High and low temperature, strong weather resistance, non-corrosive and never aging. It can be used indoors or outdoors, making up for the shortcomings of traditional resin light-storing self-luminous materials which are easy to age and have short service life.
Inorganic light storage self-luminous material is made of academician expert team hired by Globright Co.,LTD. They studied the situation in which the luminous self-luminous material was changed from the synthetic resin of the luminous material before. Let it become the luminous body which include many multi-mineral materials such as rare earth, strontium aluminate, silicate, and inorganic crystal.
♦ Safety guidelines for caverns, civil air defense works, tunnels, underground garages, basements
♦ Fire protection signs and safety guidelines
♦ Safety signs and decorations for trails, corridors, park roads, courtyards
♦ Safety guidelines for river banks and reservoir embankments
♦ Safety signs and decorations in the fields of stairs, skirtings, etc.
♦ Safety identification of electricity and communication facilities
♦ Decoration of the exterior of the house
No electricity required-no longer dark at night!
The product meets the requirements of GB / T4100-2015 "Ceramic Tiles" Appendix G: Dry pressed ceramic tiles E≤0.5% B l a and GB 6566-2010 "Limits of Radionuclides for Building Materials". Surface density of luminescent layer：≥2.2 Surface hardness of luminescent layer：Mohs 5 Low temperature resistance：≤-40℃ High temperature resistance：≥180℃ Failure strength：≥5000N Impact resistance：≥0.84 Abrasion resistance：≥Level 3/1500 rpm Pollution resistance：≥level 5 Frost resistance：No cracks and peeling Thermal shock resistance：No cracks and peeling Wet swelling：≤0.02mm/m Coefficient of linear thermal expansion：≤6.2×10-6 ℃-1 Modulus of rupture：Average and maximum value≥43MPa Chemical resistance：Reach GA level Radioactivity：Meets Class A requirements Self-luminous brightness：Product excitation stopped for 10 hours, afterglow intensity ≥16mcd / m2
| |
| |
| |
